WOODTURNING SUPPLY
COMPANIES:
- Craft Supplies, USA
- Packard Woodworks
FACEPLATES – TOOL RESTS:
Bill Kuhlemeier
Sea Horse Custom Fab.
486 Banks Chapel Rd.
Ranger, GA 30734
(706) 334-4057
FACEPLATE SCREWS:
- McMaster-Carr Supply Co.
(see address under ‘tool steel’)
#14 x 1”, Phillips Round Head
- Manhattan Supply Corp. (MSC)
#14 x 1”, Phillips Round Head
Cat. #87923447 - $20.12/100
#14 x 1 ¼”, Phillips Round Head
(see address under ‘grinding wheels’)
FACEPLATE TAPS: 1”, 1 ¼”, 33mm x 8tpi
J. & J Beall Tool Co.
541 Swans Rd. NE
Newark, OH 43055
(704) 345-5045
DC MOTOR DRIVES:
Woodco Products – Chuck Woodruff
5507 55th Ave. South
Seattle, WA 98118
Voice/Fax: (206) 723-8487
VACUUM CHUCKS:
Bill Grumbine
1587 Siegfriedale Rd.
Kutztown, PA 19530
(610) 248-7661
VACUUM PUMPS:
¼ HP, 220V - $89.95
[Cat#: 90048A315]
SPRAY LACQUER:
Krylon Acrylic
“Crystal Clear” - #1303
“Matte Finish” - #1309
“UV-Clear” - #1305
GRINDING WHEELS & Assorted
Accessories for Wood and Metal
MSC Industrial Supply Co. Inc.
100 MSC Drive
Jonestown, PA 17038-0000
Tel: 800-645-7270
100/120 Grit Aluminum Oxide
8” x 1”, 5/8” arbor
Cat. #75941443………$22.00
BUFFING WHEELS &
POLISHING COMPOUNDS:
Hagstoz Jewelry Supply
709 Sansom St.
Philadelphia, PA 19106
Tel: (215) 922-1627
SANDPAPER: (Auto body & paint suppliers)
Self-sticking 6” discs (220gr):
Norton #32374
Self-sticking 5” discs (320gr):
Norton #32371
ABRANET SANDING DISCS [5” & 6”]
Abranet Finishing Discs & Interface Pads
(216) 631-5309
www.homesteadfinishing.com (appear to be out of business)
[Look under “Abrasives”, then Mirka
Abrasives”, scroll to bottom of page]
Also 2” & 3” from Steve Worchester
3304 Colt Dr., Plano, TX 75074
972-424-7958, steve@turningwood.com
TOOL STEEL:
- ENCO – 800-873-3626
www.use-enco.com
- McMaster-Carr
732-833-0300
- MSC (see above)
0-1 Drill Rod: 3/8, 7/16”, ½” x 36”
¼” & 3/16” square 10% cobalt tips
“VERTICAL SOLUTION”
[Sharpening aid for Ellsworth sharpening jig]
Don Geiger
2606 NW170th St.
Newberry, FL 32669
352-472-5035